User Manual

9
Figure 3-1
3.2.2. Installation Conditions
Ceiling-mounted speed dome can be installed on the hard ceiling structure both indoors and outdoors, the ceiling
needs to meet the following installation conditions:
• The ceiling shall be thick enough to install expansion bolts.
• The ceiling shall sustain at least 8X weight of the speed dome, bracket and other accessories.
3.3. Installation Steps
This section provides step by step instructions on how to install your camera.
Step 1 Place the installation template of the speed dome on the ceiling after installation location is confirmed,
which is shown in Figure 3-2.
Figure 3-2
Step 2: Install the expansion bolts into the mounting holes and use screws to fix the changeover plate on the
ceiling, which is shown in Figure 3-3.