Amcrest PT Network Camera User Manual Version 1.1.
Welcome ........................................................................................................................................................................5 Important Security Warning ..........................................................................................................................................5 Important Safeguards and Warnings .............................................................................................................................
5.4.1.2 Video ....................................................................................................................................................29 5.4.1.3 Audio ....................................................................................................................................................32 5.4.2 Network ......................................................................................................................................................33 5.4.2.
5.4.5.2 Manage Users ......................................................................................................................................62 5.4.5.3 Restore Factory Settings ......................................................................................................................63 5.4.5.4 Import/Export ......................................................................................................................................63 5.4.5.5 Auto Maintain ...................
Welcome Thank you for purchasing our Amcrest PT Network Camera! This user manual is designed to be a reference tool for the installation and operation of your PT camera. Here you can find information about the camera’s features and functions, as well as information to aid in troubleshooting. Many of the setup and installation sections below have corresponding videos on YouTube To access the setup videos, please go to http://amcrest.
Important Safeguards and Warnings 1．Electrical Safety All installation and operation should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for any fires or electrical shock caused by improper handling or installation. 2．Transportation Security Heavy stress, violent vibrations, and excess moisture should not occur during transportation, storage, and installation of the device.
1 Features and Specifications 1.1 Overview The Amcrest PT Network Camera is an excellent digital surveillance product that can be useful to a wide variety of users. The camera connects to any router, and uses an internet connection to allow the user to access all of its functionality from many internet connected devices. It’s easy to use and can be set up in a relatively small amount of time.
2 Device Overview The diagram below shows the camera’s profile and rear panel.
Please refer to the following chart for information about the camera and its ports. Number Name 1 Power port 2 Audio Input/Output ports 3 SD Card slot 4 Alarm Input/Output ports 5 Reset/WPS button/Indicator Light (For reset, long press for 10 seconds; for WPS, one quick press) 6 Network port Please refer to the chart below for information about the camera’s indicator light: Indicator Light Status Device Status Red Light is blinking quickly. The device is activating.
3 Connection & Installation This section provides information about the connection and installation of the Amcrest PT Network Camera. 3.1 Connection Guide The camera initially should be connected via the following method: In addition to connecting the camera to a computer, the camera should also be connected to a power source, by connecting the included power cable to both a power outlet, and the camera. 3.
4 Camera Access Setup This section of the guide will provide the user with information on how to setup access to the camera through any of the following methods. 4.1 Default Username and Password To login to the system for the first time, use one of the following default username/password combinations. Once you’ve successfully logged in, it is highly recommended to change the password for security reasons.
4. On the app, tap the plus sign in the top right hand corner. 5.
6. Click the button that says “Scan QR Code”. Alternatively, in some versions of the app, tap the QR code icon that shows in the right part of the SN field. 7. Point the phone’s camera at the QR code on the bottom of the PT Network camera. Make sure the QR code fits inside of the clear box in the center of the phone screen. Your phone will vibrate and take you back to the previous page when the scan is successful.
8. Enter a name for the camera, then enter the Username and Password used to login to the camera. By default, the username is “admin” and the password is “admin”, then tap Next. 9. If the WiFi network is protected with a password, enter it in the field on this screen, then tap Next.
10. Wait for the camera to connect to the WiFi Network, and when the camera is done connecting to the network, the Added Successfully screen will display. 11. Enter in a new password for the camera in order to secure it. Once the new password has been entered and confirmed, tap OK. 12. The device is now successfully setup for live viewing! Click Start Live Preview to show the camera’s feed.
4.3 Amcrest Cloud Setup The Amcrest PT Network Camera is able to sync with Amcrest Cloud; a service that stores recorded video and audio streams in order to enable long-term storage. Amcrest Cloud also allows the user to easily find and download recorded video for playback from any internet connected PC or Mac computer. 1. 2. 3. 4. 5. Connect the camera to a power supply using the included power adapter. Connect the camera to the internet, either through a wired connection (see section 3.
4.5 Remote Web Access Setup There are two main methods for setting up remote access: UPnP/DDNS, and Port Forwarding. 4.5.1 UPnP/DDNS Remote Web Access Setup Using Universal Plug and Play (UPnP) and Dynamic Domain Name Server (DDNS) functionality is the easiest way to setup stable remote access. For this method, your router should support the uPnP networking protocol and the protocol should be enabled. Please refer to your router manufacturer’s documentation to learn how to enable uPnP on your router.
Below is a step-by-step walkthrough that details how to setup the camera for Remote Web Access using Port Forwarding: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Login to your camera, open the main menu then go to Setup -> Network. Open the TCP/IP settings screen. By default, the camera has the mode set to DHCP. Ensure that DHCP is selected. The IP Address, Subnet Mask, Default Gateway, Preferred DNS, and Alternate DNS should all be 0s if DHCP is selected.
4.6 AmcrestView.com Access Setup 1. 2. 3. 4. 5. 6. 7. Connect the camera to a power supply using the included power adapter. Connect the camera to the internet, either through a wired connection (see section 3.1), or through WiFi (see section 4.2) Using Internet Explorer or Safari, go to www.AmcrestView.com and register an account. You will be required to activate your account by e-mail (double-check your spam folder). Once activated, download and install the plugin for your web browser.
5 Operation and Interface This section of the manual details the camera’s interface, as well as all of the operations the camera can perform. The main interface of the camera contains 6 major tabs on the top of the screen. By default, the interface opens on the Live tab. 5.1 Live The Live tab allows the user to see a live video feed from the camera.
Section 1: This bar allows the user to select which stream type and which protocol they want to choose. For more information on stream types, see section 5.4.1.2.1. For more information on protocols, see section 5.4.2.2.1. Section 2: The functions bar allows the user to perform different camera functions while in live mode.
5.2 PTZ The PTZ tab allows the user to change the position of the camera. Below is a screenshot of the PTZ tab: The PTZ control panel allows the user to position the camera in different ways. Below is a screenshot of the PTZ control panel: The arrows on the PTZ control panel allow the user to move the camera’s position in a specific direction. The button in the middle of the direction arrow allows the user to select an area in the live view to zoom in on.
The speed dropdown box allows the user to control the speed at which the camera moves. The values range from 1 to 8, 8 being the fastest. The zoom buttons allow the user to digitally zoom in and out on the live preview picture. The dropdown box under PTZ settings allows the user to configure Presets and Tours. Preset allows the user to designate specific PTZ positions for the camera. To create and manage presets, follow the steps below: Configure the camera positioning as needed.
1. Quick Actions: This panel allows the user to zoom in on playback footage, take a snapshot of the playback footage, or open the help menu. 2. File Menu: This panel allows the user to select a file type and data source. 3. Calendar: This panel allows the user to pick a date that they would like to playback video from. When a date has recorded footage available, it’s green. The current date is blue, unless it has recorded footage, then it’s a lighter green. 4.
5.4 Setup The Setup tab allows the user to change different camera settings. Below is a screenshot of the setup tab: There are 3 main sections to note in the Setup tab: 1. 2. 3. Menu Bar: The menu bar is composed of menu sections, which when clicked display any menu items that fall under their category. Menu Items: These menu items each open up a different menu that allows the user to change specific settings for the camera. Menu Tab: These tabs open up menu options for certain menu items.
5.4.1 Camera This menu section allows the user to change different camera settings for video, audio, and to manage image profiles. 5.4.1.1 Configuration This menu allows the user to configure image profiles for normal, day, and night usage. 5.4.1.1.
effect on the general brightness of the whole video. The video color may become too strong if the value is too high. For the grey part of the video, distortion may occur if the white balance is not accurate. Please note the video may not be clear if the value is too low. The recommended value ranges from 40 to 60. Sharpness: This slider is used to adjust the sharpness of the video. The value ranges from 0 to 100.
5.4.1.1.2 Profile Management Below is a screenshot that shows the Profile Management tab in the Configuration menu item: Below is an explanation for each of the fields on the Profile Management tab in the Configuration menu item: Profile Management: This set of radio buttons allow the user to set what basis the profile management settings run on. There are 3 options: Normal, Full Time, and Schedule.
5.4.1.2 Video This section allows the user to change video settings for the camera’s video feed. There are 4 tabs in this menu item: Video, Snapshot, Overlay, and Path. 5.4.1.2.1 Video Below is a screenshot that shows the Video tab in the Video menu item: Below is an explanation for each of the fields on the Video tab in the Video menu item: Code-Stream Type: This dropdown box allows the user to select different encode frame rates for different recorded events.
Watermark Character: This field allows the user to set the watermark’s text. The default string is DigitalCCTV. The maximum length is 85 characters. This string can only include numbers, characters, and underscores. Sub Stream is a lower quality stream that allows the feed to take up less resources and bandwidth when streaming. The Main Stream and the Sub Stream have the same fields. Sub Stream can be enabled by checking the box next to Enable.
5.4.1.2.3 Overlay Below is a screenshot that shows the Overlay tab in the Video menu item: The menu on the left allows the user to select which overlay to modify. Privacy Masking, Channel Title, Time, and Text Overlay can all be modified in this menu. For Privacy Masking, the radio button enables or disables the feature. To set a privacy mask, click one of the boxes in the live view window, and position or resize it as needed. To remove a box, click on it, then click the delete button.
5.4.1.2.4 Path Below is a screenshot that shows the Path tab in the Video menu item: Below is an explanation for each of the fields on the Path tab in the Video menu item: The Live Snapshot field allows the user to select where to save live snapshots to. Click the Browse button to select a different destination folder. The Live Record field allows the user to select where to save live recordings to. Click the Browse button to select a different destination folder.
Below is an explanation for each of the fields on the Audio menu: Enable: This checkbox allows the user to enable audio recording. Encode Mode: This dropdown box allows the user to select what audio format the audio should be recorded in. Sampling Frequency: This dropdown box allows the user to select a sampling frequency for the audio. The options are 8k and 16k. 16k audio sampling allows for higher sound quality. Audio In Device: This field allows the user to select what source to get audio from.
Below is an explanation of the fields on the TCP/IP settings tab: Host Name: This text field allows the user to change the host device name for the camera. This field supports a maximum of 15 characters. Ethernet Card: This dropdown box allows the user to select which internet access device to use. If the device is connected to a wired connection and a wireless one at the same time, then this box will have options to pick either of the connections.
Below is an explanation of the fields on the P2P settings tab: Enable: This checkbox allows the user to enable the P2P feature for the camera. This feature must be enabled for the camera to connect to a smartphone or tablet via the Amcrest View app. It is enabled by default. Status: This field displays the status of the P2P connection. Once the camera is connected to a device, this field should display the word Online. UID: This field displays the Token ID for the camera.
5.4.2.2.2 ONVIF The ONVIF tab is where users can configure authentication via the ONVIF standard. Below is a screenshot of the ONVIF settings tab: To enable ONVIF, click the radio button next to Enable, and then click the save button. To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings, click the Save button. 5.4.2.3 PPPoE PPPoE stands for Point-to-Point Protocol over Ethernet.
5.4.2.4 DDNS DDNS stands for Dynamic Domain Name Server. This technology is used to automatically update name servers in real time in order to help the camera maintain a persistent address despite changes in location or configuration. What this means is that even when the camera is restarted, moved, or reconfigured, it can keep the same IP address, thus allowing remote users uninterrupted access to the camera, rather than having to request a new IP address to use for remote access anytime a change is made.
5.4.2.5 IP Filter This screen allows for the filtering of IP addresses, either blocking them, or granting them access to the camera. This feature helps make the camera more secure by limiting remote access only to approved users. Below is a screenshot of the IP Filter screen: Below is an explanation of fields on the IP Filter settings screen: Trusted Sites: This checkbox allows the user to enable the IP Filter feature for trusted sites.
5.4.2.6 SMTP (Email) This screen allows for the configuring of email settings in order to permit the camera to send emails when an alarm is triggered. Below is a screenshot of the email settings screen: Below is an explanation of fields on the SMTP (Email) settings screen: SMTP Server: SMTP stands for Simple Mail Transfer Protocol. This field allows the user to enter the SMTP server used by the email service.
5.4.2.7 UPnP UPnP stands for Universal Plug and Play, and it is a protocol used to easily connect devices to the internet. In the case of this camera, it allows the camera to connect to the router in an easy manner to quickly allow for remote access. Below is a screenshot of the UPnP settings screen: Below is an explanation of fields on the UPnP settings screen: Enable: This checkbox allows the user to enable the UPnP function.
5.4.2.8 SNMP SNMP stands for Simple Network Management Protocol. This protocol is used to provide a basic framework in order to allow connection between various network devices. Below is a screenshot of the SNMP settings screen: Below is an explanation of fields on the SNMP settings screen: SNMP Version: These checkboxes allow the user to select the SNMP version to use. SNMP Port: This field allows the user to write in a port for SNMP to use. The port can range from anywhere from 1 to 65535.
Click the checkbox next to Enable to the Bonjour functionality. The Server Name field allows the user specify what name to use in order to connect devices via the Bonjour protocol. To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings, click the Save button. 5.4.2.10 Multicast Multicast is a feature that enables the camera to broadcast its live view to multiple computers on the same network.
Below is an explanation of the fields on the WiFi tab of the WiFi menu: Enable: This checkbox allows the user to enable WiFi functionality. Add SSID: This button allows the user to manually enter in an SSID. Search SSID: This button allows the user to search for more SSIDs. Refresh: This button obtains the most recent WiFi network information. To connect to a WiFi network, click the line item for a specific network, and enter in the password if needed. 5.4.2.11.
To enable 802.1x, click the checkbox next to Enable. An authentication method can be chosen from the dropdown box, and a username and password can be entered in their respective fields. To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings, click the Save button. 5.4.2.
5.4.3 Event This menu section allows the user to change different settings for triggering events. 5.4.3.1 Video Detection The video detection menu has two tabs: Motion Detect and Video Tamper. 5.4.3.1.1 Motion Detect This tab allows the user to modify motion detection settings. Below is a screenshot of the Motion Detect tab: Below is an explanation of the fields on the Motion Detect tab: Enable: This checkbox enables motion detection for the camera.
system detects another alarm signal, it can generate a new alarm since the anti-dither time has expired. Detection Area: Clicking this button opens a pop up screen that can be used to set detection areas. o When the setup button is clicked, a live stream of the video is shown. The user can then set up to 4 regions, each with their own region name, sensitivity (1-100), and threshold (1-100).
5.4.3.1.2 Video Tamper This tab allows the user to modify video tamper settings. Below is a screenshot of the Video Tamper tab: Below is an explanation of the fields on the Video Tamper tab: Enable: This checkbox enables a video tamper alarm for the camera. Working Period: Clicking this button opens a weekly schedule that can be used to set times. o Click and drag to set video tampering for certain days of the week.
5.4.3.2 Audio Detection This menu allows the user to modify audio detection settings. Below is a screenshot of the Audio Detect screen: Below is an explanation of the fields on the Audio Detect tab: Enable: This checkbox enables an audio detection alarm for the camera. Enable Intensity Change: This checkbox enables intensity change for the camera audio. o Sensitivity is the amount of change required to increase the audio detected by a percentage.
Record: This checkbox allows the user to enable the camera to record video when an audio detection alarm is triggered. Record Delay: his field specifies in seconds how long the delay between alarm activation and recording should be. Relay Out: This checkbox allows the user to enable the camera to trigger a connected alarm (connected to the alarm port on the back of the camera) when a motion detection alarm is triggered.
o Click and drag to set alarm activation for certain days of the week. Also, periods of motion detection can be set for each day and enabled using the period settings on the bottom half of the screen. There are a total of 6 periods that can be set. Anti-Dither: This field allows the user to set the anti-dither time. The values in this field can range from 5 to 600 seconds. This time value controls how long the alarm signal lasts.
5.4.3.4 Abnormality This menu has 3 tabs: SD Card, Network, and Illegal Access 5.4.3.4.1 SD Card This tab allows the user to set the camera’s response to an SD card related abnormality. Below is a screenshot of the SD card tab screen: Below is an explanation of the fields on the SD Card settings tab: Event Type: This dropdown box allows the user to select which SD card abnormality to set event triggers for. The 3 options are No SD Card, SD Card Error, and Capacity Warning.
5.4.3.4.2 Network This tab allows the user to set the camera’s response to a Network related abnormality. Below is a screenshot of the Network tab screen: Below is an explanation of the fields on the Network settings tab: Event Type: This dropdown box allows the user to select which Network abnormality to set event triggers for. The 2 options are Disconnection and IP Conflict. Enable: This checkbox enables the Network abnormality trigger for the camera.
5.4.3.4.3 Illegal Access This tab allows the user to set the camera’s response to an Illegal Access related abnormality. Below is a screenshot of the Illegal Access tab screen: Below is an explanation of the fields on the Illegal Access settings tab: Enable: This checkbox enables the Illegal Access abnormality trigger for the camera. Login Failure: This field allows the user to specify how many failed login attempts must be attempted in order to trigger an Illegal Access abnormality event.
5.4.4 Storage This menu section allows the user to change storage settings for the camera. 5.4.4.1 Schedule The schedule menu manages the recording schedule for the camera. This menu has 3 tabs: Record Schedule, Snapshot Schedule, and Holiday Schedule. 5.4.4.1.1 Record Schedule This tab is where video recording settings are configured.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings, click the Save button. 5.4.4.1.2 Snapshot Schedule This tab is where snapshot recording settings are configured. Below is a screenshot of the Snapshot Schedule settings screen: Below is an explanation of the fields on the Snapshot Schedule settings tab: Record Type: These checkboxes allow the user to select which snapshot type they want to configure on the schedule.
5.4.4.1.3 Holiday Schedule This tab is where holiday settings are configured. Below is a screenshot of the Holiday Schedule settings screen: Below is an explanation of the fields on the Holiday Schedule settings tab: Record Type: These checkboxes allow the user to select which recording type they want to configure on the schedule. There are 2 types of recordings: o Record: This checkbox is referring to video recording. o Snapshot: This checkbox is referring to snapshot recording.
5.4.4.2 Destination This menu controls where recorded media is stored. There are 4 tabs in this menu: Path, SD Card, FTP, and NAS. 5.4.4.2.1 Path This tab is where the user can designate a path for recorded video and snapshots to reside in. Below is a screenshot of the Path tab: Below is an explanation of the fields on the Path settings tab: Event Type: This column designates storage options available to the camera. The options are SD Card, FTP, and NAS.
Refresh: This button refreshes the SD card table. Format: This button formats the SD card. 5.4.4.2.3 FTP This tab is where the user can change FTP settings. Below is a screenshot of the FTP tab: Below is an explanation of the fields on the FTP settings tab: Enable: This checkbox allows the user to enable FTP uploading for the camera’s recorded media. FTP Address: This field allows the user to designate a DDNS address for the FTP server.
5.4.4.2.4 NAS This tab is where the user can change NAS settings. Below is a screenshot of the NAS tab: Below is an explanation of the fields on the NAS settings tab: Enable: This checkbox allows the user to enable NAS uploading for the camera’s recorded media. DDNS Address: This field allows the user to designate a DDNS address for the NAS server/device. Remote Directory: This field allows the user to specify a remote directory on the NAS to send the recorded media to.
5.4.5 System This menu section allows the user to change general settings for the camera. 5.4.5.1 General This menu controls where general settings are configured. There are 2 tabs in this menu: General and Date & Time. 5.4.5.1.1 General This tab is where the user can configure some basic camera settings. Below is a screenshot of the General tab: Below is an explanation of the fields on the General settings tab: Device Name: This field allows the user to change the device’s name.
5.4.5.1.1 Date & Time This tab is where the user can configure the date and time settings for the camera. Below is a screenshot of the Date & Time tab: Below is an explanation of the fields on the General settings tab: Date Format: This dropdown box allows the user to change the date format used in the camera. Time Format: This dropdown box allows the user to change the time format used in the camera.
5.4.5.2 Manage Users This menu allows the user to change the user accounts on the camera. By default, the camera only has the admin account which has all rights/authorities. Additional accounts can be created on this screen. Below is a screenshot of the manage users screen: Below is an explanation of the fields on the Manage Users screen: Anonymous Login: This checkbox allows the user to enable the anonymous login feature. This allows all user account names to remain hidden on this screen.
5.4.5.3 Restore Factory Settings This screen allows the user to reset the camera and all of its settings to the factory settings. Below is a screenshot of the Default screen: Note: An alternate method to conduct a Factory Reset for the device is to press and hold the indicator light/reset button on the back of the device for 10 seconds (until the light changes). 5.4.5.4 Import/Export This screen allows the user to import or export settings from the camera.
5.4.5.5 Auto Maintain This screen allows the user to set auto maintenance settings for the camera. Below is a screenshot of the Auto Maintain screen: Below is an explanation of the fields on the Auto Maintain screen: Auto Reboot: This checkbox allows the user to enable the auto reboot function. The dropdown box and field to the right of this checkbox allow the user to specify what date and time of the week the camera will auto reboot.
5.4.6 Information This menu section allows the user to view information about the camera for reference purposes. 5.4.6.1 Version This screen allows the user to see various information about the camera’s software versions, as well as other information. Below is a screenshot of the camera’s version screen: On this screen, software version, web interface version, and ONVIF version are displayed. Also, the UID (Token ID) is displayed here. 5.4.6.2 Log This screen is where the camera’s activity log is kept.
5.4.6.3 Online Users This screen allows the user to see which users are online. Below is a screenshot of the Online Users screen: Click Refresh to refresh this table. 5.5 Alarm This screen is where the alarm log is kept. Below is a screenshot of the alarm screen: The table on the right shows the alarm log and all of the alarm instances that have occurred. The checkboxes allow the user to narrow down which alarms they want to see in the alarm log.
6. FAQs/Troubleshooting 1. The camera does not boot up properly. Below are a few possible reasons why this may be occurring: The power input is not correct voltage. The power cable connection is not secured correctly. The firmware was upgraded incorrectly. 2. Camera often automatically shuts down or stops running. Below are a few possible reasons why this may be occurring: The input voltage is too low or is not stable. The insides of the camera have accumulated too much dust.
Below are a few possible reasons why this may be occurring: The video quality setting is too low. The camera software has a read error. Restart the camera to solve this problem. The SD card is broken. The SD card slot is malfunctioning. The camera’s hardware is malfunctioning. 8. There is no audio during real-time monitoring. Below are a few possible reasons why this may be occurring: The camera’s microphone is damaged. The speakers being used are not sufficiently powered.
12. Web Access isn't working. Below are a few possible reasons why this may be occurring: Windows version is pre -Windows 2000 service pack 4. Use a more recent version of Windows. ActiveX controls have been disabled. The PC is not using DirectX 8.1 or higher. Upgrade to a more recent version of DirectX. The camera is having network connection errors. Web access may be setup incorrectly. The username or password may be incorrect. 13. Web Access live view is only displaying a static picture.
17. Alarms are not working. Below are a few possible reasons why this may be occurring: The alarm is not setup correctly. The alarm cable is not connected correctly. The alarm input signal is not correctly configured. There are two loops connected to one alarm device. 18. The camera is not recording enough video. Below are a few possible reasons why this may be occurring: The storage capacity is not enough. The storage device is damaged. 19. Downloaded files cannot be played back.
Glossary of Terms Abnormality – Any malfunction in terms of storage of data to the SD card. Alarm Delay – The gap in time between alarm activation and Relay alarm activation. Alternate Gateway – The node on the computer network that the network software uses when an IP address does not match any other routes in the routing table, and when the default gateway is not available. Anti-Dither – This time value controls how long the alarm signal lasts.
Sub Stream – Sub Stream is an alternative streaming protocol for the camera. Sub stream uses less bandwidth and attempts to keep fluency high at the expense of quality. Subnet Mask – a 32-bit number that masks an IP address, and divides the IP address into network address and host address.
Appendix A: Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Pb Hg Cd Cr VI PBB PBDE Sheet Metal(Case) ○ ○ ○ ○ ○ ○ Plastic Parts （Panel） ○ ○ ○ ○ ○ ○ Circuit Board ○ ○ ○ ○ ○ ○ Fastener ○ ○ ○ ○ ○ ○ Wire and Cable/Ac Adapter ○ ○ ○ ○ ○ ○ Packing Material ○ ○ ○ ○ ○ ○ Accessories ○ ○ ○ ○ ○ ○ O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the rel
Note: For detailed operational instructions, please refer to the User Manual on the CD that was included in your purchase. To view setup videos for many of the steps outlined in this guide, go to http://amcrest.com/videos This user manual is for reference only. Slight differences may be found in the user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks mentioned are the properties of their respective owners.
