User Manual
FAQ
Once the webcam has been uninstalled, unplug the
USB cord from your computer and then plug it back
into the USB port. The webcam will automatically
install the new driver. Wait about 1 minute and verify
if the microphone is working properly.
The audio settings can also be adjusted in the
settings menu using any third party software.
-10-
5. Why does the feed from the webcam keep
flickering and cutting out on the bottom?
This could be an indication that there is inadequate
power being supplied to the webcam. Please try
other USB port, such as one on the back of the
computer, which gets power from the mainboard of
your computer.
6. How do I adjust video settings for the webcam?
All video settings and parameters will be controlled
by the settings of the third party viewing software or
from the local camera software on your computer.
Access the webcam settings located in your
information on adjusting video settings, please visit:
https://www.amcrest.com/video