User's Manual

4
1. Press the menu button on the monitor unit to display the main menu on
the screen. See Fig. 12.
2. Use the left and right buttons to navigate through the menu.
3. Press the Zoom/OK button to confirm a setting.
4. The main menu contains submenus.
Camera Selection ( Camera Select )
In this submenu you can switch between multiple cameras if the cameras have
been paired. See Fig. 13.
Feed Timer Setting ( Feed Timer )
In this submenu you can set up feed timer to remind you the timing. See Fig. 14.
Temperature Setting ( Temp. Setting )
1. In this submenu you can choose the temperature unit between degrees
Celsius or degrees Fahrenheit. See Fig. 15.
2. You can set the temperature range of the temperature alert. If you select "Alert
On" to enable the temperature alert and the temperature is outside
the range, a warning sound will be emitted from the monitor unit. See Fig. 15.
Camera Setting ( Camera Setting )
The system comes with a camera unit that has already been paired with the
monitor unit. The "Cam Setting" function gives each baby unit a separate
channel on the monitor unit. This is necessary for configuring additional
camera units.
Menu Options
6
3
3.1
3.2
3.3
3.4
Volume Setting
1. Press the volume setup button to enter volume setup. See Fig. 9.
2. Press up or down buttons to adjust volume level, and then press ok
button to confirm the setting. Fig. 9.
Talkback Function
Press the talkback button to speak through the camera unit, and the icon
will then be displayed on the screen. See Fig. 10.
Music Function
You can play the music with the camera (three pieces of music) .
1. Press the music button , the camera will play music. See Fig. 11.
2. Press the music button again, the camera will play the next song.
2.7
2.6
2.5