User's Manual

22
4.3.3 Audio sync WiFi setup
The audio sync WiFi setup method is a simple setup method that uses plug-and-play technology to make the app
setup process seamless.
Note: This setup method currently only works for Amcrest IP3M-941 and IP3M-HX2 model cameras. Please use
either WiFi Configuration Setup or Ethernet WiFi Setup if you have another camera model.
Plug in your camera and follow the steps below to get your camera up and running. Please wait 30 seconds after
plugging in the camera to allow it to initialize.
1. Download and open the Amcrest View Pro app from the App Store or Play Store.
2. From the home screen, tap the icon in the top
right corner to open the Device List.
3. Tap the Add Device button.