User's Manual

TWS OPERATION INSTRUCTIONS
Auto Power On: Once both earbuds are removed
from the case they will automatically power on, a
blue light on each earbud will on about 1 second, a
blue light of the left one will have 3 flashes at a time
and the connection process will start.
(Note: The case must be charged timely in order for the
earbuds to automatically power on. If the case is not
charged, the earbuds can be manually turned on.)
Manual Power On: Press and hold the main button
on the and earbud at the same time for about 3
seconds to power on. A blue light will on and begin
to flash on the earbuds followed by a “Power On”
message through the earbuds.
Auto Power Off: Place the earbuds back into the
case and close the lid. Once they are put into the
case, they will automatically power off and enter into
the charged state when a red light flashing on each
earbud.