Manual
Table Of Contents

^USER'S MANUAL
Split Wall-Mounted Air Conditioner
[Methods of Maintenance]
The air conditioner must be turned off power before the maintenance is to be carried 
out.
Before the season of operation
I Check if there are any blocking materials 
’ in the intake and outlet vents of the indoor 
and outdoor units.
During the season of operation
The deaning of the ai :r screen (Standard intervals should be once every two weeks).
I Check if the installation  stand  is corroded 
' or rusty.
Check  if  the machine Is 
properly grounded.
©
LI
 1 Check If the air filter Is clean.
Connect to the power source.
L*J Put batteries In the remote controller.
After the season of operation
Remove the air filter screen from the unit.
t Gently press the two lower ends of 
the grid and open it.
I Gently pull up the air filter screen and 
take it out In the direction of your body.
n
Clean the air filter screen.
if the screen Is very dirty, please use lukewarm water (about 
30'C or 86T) to clean It. Air it dry after the cleaning.
Note;
•Do not use boiling water to dean the screen.
•Do not bake the screen dry over a fire.
•Do not exert too much force in pulling and stretching the screen.
El
Install the air filter screen.
To operate the air conditioner without the air filter screen on will cause the interior of the 
machine dirty which might lead to poor performances or damages to the units.
Clean the air conditioner
•  Use a soft and dry doth to tub the air conditioner, 
or use a vacuum cleaner to dean it.
•  If the air conditioner Is very dirty, use a piece of 
cloth and soak it with neutral home-use detergent 
to do the deaning.
□
Set the temperature at 30'C or 86T and operate ^ 
In the fan status for about half a day.
To make the interior of the units dry
stop  the  operation of  the  machine  and  turn  off 
the power switch.
The air  conditioner will  consume about  5W of  electric 
power after the machine Is turned  off. For the purpose 
of energy saving  and  safety, it  is advisable  to  pull the 
plug out during the non-operational seasons.
Clean and Install the air filter screen.
Wa ICIean the Indoor and outdoor units.
I Take the batteries out from the remote controller.
Note:
If the air filter screen is blocked by dust or dirt, the 
performance of cooling and heating will be affected, with 
the operation noise and power consumption Increased. 
Therefore, the air filter screen should be cleaned regularly.










