User guide

Shell Object Commands
www.3ware.com 25
/ specifies the root
./object specifies the next level of the object.
/c0/bbu specifies a relative path with respect to the current focused
hostname.
Example:
//localhost> focus /c0/u0
//localhost/c0/u0>
//localhost/c0/u0> focus..
//localhost/c0>
//localhost> focus u0
//localhost/c0/u0>
//localhost/c0> focus /
//localhost>
The focus command is available by default. You can disable focus by setting
TW_CLI_INPUT_STYLE to old. (See “Return Code” on page 103.)
commit
This command sends a commit command to all 3ware controllers in the
system. For more information, see “/cx commit” on page 51.
flush
This command sends a flush command to all 3ware controllers in the system.
For more information, see “/cx flush” on page 51.
rescan
This command sends a rescan command to all 3ware controllers in the system.
For more information, see “/cx rescan [noscan]” on page 50.
show
This command shows a general summary of all detected controllers and
enclosures.
The output of this command will vary, depending upon your controller model
and whether there is an enclosure with an expander attached.