User guide

Configuring a New Unit
www.3ware.com 101
2 Press the Page Up key to move the unit up the list; press the Page Down
key to move the unit down the list.
Position the unit you want to be bootable at the top of the list of
exportable units.
3 When you are finished working in 3BM, press
F8 to save your changes
and exit.
Partitioning, Formatting, and Mounting Units
After you create a unit, whether through 3BM or 3DM, it needs to be
formatted, partitioned, and mounted by the operating system before it can be
used.
The steps vary, depending on whether your operating system is Windows,
Linux, or FreeBSD.
To partition, format, and mount under Windows
1 Boot the system and log in as a system administrator.
2 Partition and format the new arrays or disks using the
Administrative
Tools
from the Start menu:
a Choose
Computer Management from the Administrative Tools
menu.
b Select
Storage.
c Select
Disk Management.
4 Follow the steps that appear on-screen to write a signature to the drive.
5 Right-click on the drive and select
Create Volume.
6 Follow the steps that appear on-screen to create a volume and to assign a
drive letter.
The volume is automatically mounted after formatting completes.