User guide
Table Of Contents
- Title Page
- Table of Contents
- About this User Guide
- Introducing the 3ware® SATA RAID Controller
- Getting Started with Your 3ware RAID Controller
- First-Time RAID Configuration Using 3BM
- Driver Installation
- Driver Installation Under Windows
- Driver Installation Under Linux
- Obtaining 3ware Linux Drivers
- Driver Installation Under Red Hat Linux or Fedora Core 5
- Materials required
- Creating a Red Hat Linux Driver Diskette
- Installing the 3ware Kernel Driver Module while Installing Red Hat Linux on a New Unit
- Installing the 3ware Kernel Driver Module on a Red Hat or Fedora Core Linux System that Boots From a Different Device
- About Variables In the Kernel Driver Module Installation Instructions
- Driver Installation Under SuSE Linux
- Compiling a 3ware Driver for Linux
- Driver Installation Under FreeBSD
- 3ware BIOS Manager 2 (3BM 2) Introduction
- 3DM 2 (3ware Disk Manager) Introduction
- Configuring Your Controller
- Configuring Units
- Configuring a New Unit
- Creating a Hot Spare
- Naming a Unit
- Setting Unit Policies
- Changing An Existing Configuration by Migrating
- Deleting a Unit
- Removing a Unit
- Moving a Unit from One Controller to Another
- Adding a Drive
- Removing a Drive
- Rescanning the Controller
- Maintaining Units
- Checking Unit and Drive Status through 3DM
- About Degraded Units
- About Inoperable Units
- Alarms, Errors, and Other Events
- Background Tasks
- Scheduling Background Tasks
- Locating a Drive by Blinking Its LED
- Maintaining Your Controller
- Determining the Current Version of Your 3ware Driver
- Updating the Firmware and Driver
- Downloading the Driver and Firmware
- Updating the Firmware Through 3DM 2
- Updating the 3ware Driver and Firmware Under Windows
- Using the Update Utility With Multiple Controllers
- Updating the 3ware Driver Under Windows XP
- Updating the 3ware Driver Under Red Hat or Fedora Core
- Updating the 3ware Driver Under SuSE
- Updating the 3ware Driver Under FreeBSD
- Updating the Firmware Under Linux and FreeBSD
- Viewing Battery Information
- Testing Battery Capacity
- 3DM 2 Reference
- Troubleshooting
- Appendices
- Index
1 3ware Serial ATA RAID Controller User Guide
1
Introducing the 3ware
®
SATA
RAID Controller
AMCC 3ware RAID controllers deliver full-featured, true hardware RAID to
servers and workstations. AMCC's RAID controllers offer Serial ATA (SATA)
and SATA II interfaces in both low profile and full-height footprints.
Combined with an advanced RAID management feature set that includes
web-based, command-based, and API (application programming interface)
software components, AMCC controllers, available in 2-, 4-, 8-, 12-, 16-, and
24-port configurations, provide compelling RAID solutions.
This section introduces the features and concepts of AMCC 3ware RAID
controllers. It is organized into the following topics:
• What’s New with 9650SE Models
• System Requirements
• Understanding RAID Concepts and Levels
• 3ware Tools for Configuration and Management
• Monitoring, Maintenance, and Troubleshooting Features
What’s New with 9650SE Models
The 9650SE models in 3ware’s 9000 series of RAID controllers have the
following features and benefits:
• Simultaneous RAID 6 parity generation to maximize RAID 6
performance
• 8th-generation StorSwitch™ non-blocking switch fabric for maximum
controller output
• StreamFusion™ optimizes RAID 5 and RAID 6 disk accesses to
maximize application performance under heavy loads
• StorSave™ BBU with write journaling optimizes data protection and
performance
• RAID levels 0, 1, 5, 6, 10, 50, Single Disk, and JBOD