Computer Accessories User Manual
Table Of Contents
- Title Page
- Table of Contents
- About this User Guide
- Getting Started with Your 3ware RAID Controller
- Introducing the 3ware® 9590SE-4ME RAID Controller
- 3DM 2 (3ware Disk Manager) Introduction
- Configuring Your Controller
- Configuring Units
- Maintaining Units
- Checking Unit and Drive Status
- About Degraded Units
- About Inoperable Units
- Alarms, Errors, and Other Events
- Background Tasks
- Scheduling Background Tasks
- Locating a Drive by Blinking Its LED
- Maintaining Your Controller
- 3DM 2 Reference
- Troubleshooting
- Appendices
- Index
Controller Details page
www.3ware.com 87
Controller Details page
Figure 32. Controller Details Page
The Controller Details page appears when you choose Information >
Controller Details
from the menu bar.
This page provides detailed information about the controller specified in the
drop-down list on the menu bar.
You can also open or download an error log from this screen.
Model. The model name of the controller.
Serial #. The serial number of the controller.
Firmware. The firmware version running on the controller.
Driver. The driver version being used to interact with the controller.
BIOS. The BIOS version on the controller.
Boot Loader. Boot Loader version on the controller.
Memory Installed. The amount of memory installed on the controller.
Bus Type. The bus type used on the controller is shown: PCI, PCIX, or PCIE.
Bus Width. The bus width used on the controller: 4 lanes, 8 lanes, or 16 lanes
for PCIE slots.
Bus Speed. The speed of the bus used on the controller is shown.
# of Ports. The number of total ports on the controller, regardless of whether
each currently has a drive connected.
# of Units. The number of units on the controller.