Computer Accessories User Manual
Table Of Contents
- Title Page
- Table of Contents
- About this User Guide
- Getting Started with Your 3ware RAID Controller
- Introducing the 3ware® 9590SE-4ME RAID Controller
- 3DM 2 (3ware Disk Manager) Introduction
- Configuring Your Controller
- Configuring Units
- Maintaining Units
- Checking Unit and Drive Status
- About Degraded Units
- About Inoperable Units
- Alarms, Errors, and Other Events
- Background Tasks
- Scheduling Background Tasks
- Locating a Drive by Blinking Its LED
- Maintaining Your Controller
- 3DM 2 Reference
- Troubleshooting
- Appendices
- Index
Monitoring, Maintenance, and Troubleshooting Features
www.3ware.com 13
• Drive Locate. You can issue drive locate commands that blink the LEDs
for particular drives, so that you can quickly identify what drive needs to
be checked or replaced. (For more information, see “Locating a Drive by
Blinking Its LED” on page 81.)
•
Auto Rebuild. For times when you do not have a spare available, setting
the Auto Rebuild policy allows rebuilds to occur with an available drive
or with a failed drive. (For more information, see “Setting the Auto
Rebuild Policy” on page 31.)