Computer Accessories User Manual
Table Of Contents
- Title Page
- Table of Contents
- About this User Guide
- Getting Started with Your 3ware RAID Controller
- Introducing the 3ware® 9590SE-4ME RAID Controller
- 3DM 2 (3ware Disk Manager) Introduction
- Configuring Your Controller
- Configuring Units
- Maintaining Units
- Checking Unit and Drive Status
- About Degraded Units
- About Inoperable Units
- Alarms, Errors, and Other Events
- Background Tasks
- Scheduling Background Tasks
- Locating a Drive by Blinking Its LED
- Maintaining Your Controller
- 3DM 2 Reference
- Troubleshooting
- Appendices
- Index
Appendix B. Driver and Software Installation
142 3ware Serial ATA RAID Controller User Guide for the Power Mac G5
3 From the Welcome screen, click Next to start the installation process.
Figure 46. Welcome Installation Screen
4 On the License Agreement page, accept the agreement and click Next.
Figure 47. License Agreement Screen
5 Select what components you want to install and click Next.
3DM and CLI are applications that let you set up and manage RAID units.
3DM is browser-based; CLI is a command line interface.
The Firmware Upgrade Utility lets you update the firmware on your
controller, if required.
The AMCC 3ware 9000 driver tells your operating system how to interact
with the 3ware RAID controller. (Installing the driver will require that
you restart your computer.)