Computer Accessories User Manual
Table Of Contents
- Title Page
- Table of Contents
- About this User Guide
- Getting Started with Your 3ware RAID Controller
- Introducing the 3ware® 9590SE-4ME RAID Controller
- 3DM 2 (3ware Disk Manager) Introduction
- Configuring Your Controller
- Configuring Units
- Maintaining Units
- Checking Unit and Drive Status
- About Degraded Units
- About Inoperable Units
- Alarms, Errors, and Other Events
- Background Tasks
- Scheduling Background Tasks
- Locating a Drive by Blinking Its LED
- Maintaining Your Controller
- 3DM 2 Reference
- Troubleshooting
- Appendices
- Index

Chapter 9. Troubleshooting
116 3ware Serial ATA RAID Controller User Guide for the Power Mac G5
0049 Battery temperature is normal
004A Battery temperature is low
004B Battery temperature is high
004C Battery temperature is too low
004D Battery temperature is too high
004E Battery capacity test started
004F Cache synchronization skipped
0050 Battery capacity test completed
0051 Battery health check started
0052 Battery health check completed
0053 Battery capacity test is overdue
0055 Battery charging started
0056 Battery charging completed
0057 Battery charging fault
0058 Battery capacity is below warning level
0059 Battery capacity is below error level
005A Battery is present
005B Battery is not present
005C Battery is weak
005D Battery health check failed
005E Cache synchronization completed
005F Cache synchronization failed; some data lost
Table 9: Error and Notification Message List
Value Message










