Computer Accessories User Manual
Table Of Contents
- Title Page
- Table of Contents
- About this User Guide
- Getting Started with Your 3ware RAID Controller
- Introducing the 3ware® 9590SE-4ME RAID Controller
- 3DM 2 (3ware Disk Manager) Introduction
- Configuring Your Controller
- Configuring Units
- Maintaining Units
- Checking Unit and Drive Status
- About Degraded Units
- About Inoperable Units
- Alarms, Errors, and Other Events
- Background Tasks
- Scheduling Background Tasks
- Locating a Drive by Blinking Its LED
- Maintaining Your Controller
- 3DM 2 Reference
- Troubleshooting
- Appendices
- Index
3DM 2 Settings page
www.3ware.com 111
Remote Access
Allow Remote Access. This field enables or disables the ability for users and
administrators to access 3DM from a remote computer.
HTTP Settings
Listening Port. This field specifies the HTTP: port to be used by 3DM when
listening for communications. The default port setting is 888.
If you change this port, make sure the port you specify is not being used.
Failure to do so will cause 3DM to stop responding and you will have to
restart it by hand.
Change Port button. Saves a new port number.