Computer Accessories User Manual
Table Of Contents
- Title Page
- Table of Contents
- About this User Guide
- Getting Started with Your 3ware RAID Controller
- Introducing the 3ware® 9590SE-4ME RAID Controller
- 3DM 2 (3ware Disk Manager) Introduction
- Configuring Your Controller
- Configuring Units
- Maintaining Units
- Checking Unit and Drive Status
- About Degraded Units
- About Inoperable Units
- Alarms, Errors, and Other Events
- Background Tasks
- Scheduling Background Tasks
- Locating a Drive by Blinking Its LED
- Maintaining Your Controller
- 3DM 2 Reference
- Troubleshooting
- Appendices
- Index
Chapter 8. 3DM 2 Reference
108 3ware Serial ATA RAID Controller User Guide for the Power Mac G5
Enclosure Details page
Figure 43. Enclosure Details Page
The Enclosure Details page appears when you click the ID of the enclosure on
the Enclosure Summary page.
Enclosure ID. The ID of the controller to which the enclosure is attached.
Fan Summary. Shows the ID of the enclosure and the status of the fan—
either OK or Unknown.
Temp Sensor Summary. Shows the ID of the enclosure and the temperature
in the enclosure.The maximum temperature for successful use of a drive
should be noted in the documentation for the drive.
Slot Summary. Lists the enclosure slots and indicates which ones contain
drives, and the status of each drive. The Identify checkbox can be used to
blink the LED associated with that slot.
Identify. Check the box for a slot to cause the LED for it to blink in the 3ware
Sidecar.