Specifications

AMC PDM1 (Phone-Doorbell-Mute Module)

Front Rear

9. Using the Link Jack to create Eight Zones

10. Mute Input and the AMC PDM1 (Phone-Doorbell-Mute Module)

(This is an optional feature)

Two XOis can be made to react as one by using the back-panel 3.5mm connection

labeled "Link". If a single mono mini-patch cable is plugged into the "Link" jack on

both XOis, it links the All Off command to make all eight zones turn off when it is

initiated at any of the zone keypads.

The back panel of the XOi has a 3.5mm non-shorting stereo connector input labeled

"Mute". This is designed to be used with the AMC PDM1 Phone-Doorbell-Mute

module. When the PDM1 is connected, the system will temporarily mute when the

phone or doorbell rings.

1,2 Doorbell

3. RJ-11 Connection

(This is an optional feature)

The back of PDM1 will accept up to two AC or DC voltages from two different

doorbell chimes.

This connection is done with two conductor wire from the terminals on the doorbell

chime to the Doorbell A or Doorbell B inputs on the back of the PDM1, Polarity is

not important for this connection.

Up to two phone lines can be brought into the RJ-11 connection on the back.

The voltage from the phone ringer will trigger the XOi System to mute.