Specifications

Volume

Mute

Power

Fig 6

6. Keypad XK1 and Zone Setup

7. EQ Control

The Zone number each keypad XK1 belonging to is decided by which RJ45

connector each keypad connected through Cat-5 cable from JK2 of XK1 to XOi.

The keypads can be used to set specific zone functions. These are for bass and

treble EQ response and source grouping.

To change bass response, press Mute and Source 2 simultaneously and then

release. Press Volume Up/Down keys for desired boost/cut as shown on volume

LEDs, Fig.6. Likewise, changing treble response can be made in the same process,

but it is accessed by pressing Mute and Source 3 together. Once the desired setting

is achieved, press any sources key will release EQ adjust mode.

8. Source Grouping Mode Capability

Sourcing Grouping is a feature that allows multiple zones in an open living space to

always share the same source selection but still retain individual volume control.

This mode forces all zones to same source and allows mute on/off and all zone off

functions to operate all zones in unison.

To engage Source Grouping Mode, press and hold a desired Source button for >5

seconds and release button when all volume indications are turned on. Source

button then turns Amber in color, indicating system is now in Source Grouping

Mode. When the Source Grouping Mode is initiated, the volume in all zones is

defaulted to -30dB.

To cancel Source Grouping Mode, press and hold a Source button from the

initiating zone for >5 seconds and release button when all volume indicators are

turned on. The source button will then turns Red in color.

The XOi system keypads automatically memorize the listening volume when all

zones have been turned off and a zone is turned on again.

Flat +4dB-4dB-6dB-8dB +6dB +8dB