Specifications

(JK2)

TO XOi

Rear Panel

or JK3 of

Main XK1

912

11 10

KEYPAD (XK1 for Zone 1 to 4)

1. LED's of Volume Level of the zone connected to the XS1 of Zone 1 to 4.

Volume-only one LED will be lighted (R5 located at Zone 1, R6 located at

up. (for energy saving purposes) Zone 2, R7 located at Zone 3 and R8

located at Zone 4) The selected source

2. Volume up / down button will remain lit.

3. IR Receiver 7. BASS and TREB

Each keypad has an IR receiver for Please see details in Section "EQ

controlling the Local and Remote Control and Source Grouping" on page

source equipments. 12.

4. Power 8. Not Used

The power button turns the keypad's They were made provisions for other

zone on and off independently. models.

5. Mute 9. JK1 (RJ45) (to XS1) (Zone 1~4) or

The mute button temporarily mutes any XU1 (Zone 5~8) or Power Amp (Zone

audio playing in that keypad's zone. 5~8)

For Zone 1~4, please use Cat-5 cable

6. Source Selection to connect from the JK1 of XK1 to the

The 4 source buttons independently RJ45 connector on the rear side of

select any of the four local sources ( XS1 for hooking to Remote Sources

Source 1 to 4) connected to the rear R5 (located at Zone 1), R6 (located at

panel of AMC XOi main unit and four Zone 2), R7 (located at Zone 3) and

Remote Sources (Source R5 to R8) R8 (located at Zone 4).

TREBBASS