User Guide

User manual-amc TR1a_G
Page 6 of 17
PN: 21-TR1a_IM
REAR SIDE PANEL
1. RJ-45
The RJ45 is for updating firmware of
TR1a or hooking TR1a to Ethernet
Network for Linking TR1a to all other
equipment with IP addresses linked
to the Ethernet Network.
2. “DC 12V” power input
connector
This DC 12V power input connector
is for connecting 12VDC power from
TR1a Power Adaptor to the TR1a.
3. “OFF / ON” Power Switch
Slide the switch to left hand side will
turn the power of TR1a OFF. Slide
the switch to right hand side will turn
the power if the TR1a ON.
4. “S VIDEO” input connector
This is an input connector for “S
VIDEO” sources.
5. “AV1” Composite Video input
RCA connector (Yellow)
This is Composite Video input RCA
connector (Yellow) for AV1 for
hooking to Composite Sources.
6. “AV1” Audio L input
RCA connector (White)
This is Audio L input RCA connector
(White) for AV1 for hooking to
Composite Sources.
7. “AV1” Audio R input
RCA connector (Red)
This is Audio R input RCA connector
(Red) for AV1 for hooking to
Composite Sources.
8. “AV2” Composite Video input
3.5mm mini connector
(Video, L, R)
This is a 3.5mm mini connector with
Video, L, R for Composite Video
“AV2” input for hooking to Composite
Sources.
9. “TV Tuner” input connector
This is a connector for hooking to TV
Antenna or Cable TV's.
10. WiFi External Antenna
This connector is for hooking to
external 5GHz 802.11a WiFi
Antenna.