User Guide

NOTE 3 (B-09, B-10, B-11, B-12)
These constants are only displayed if Flooded is selected as battery type (B-02).
NOTE 4 (C-02, C-03, C-04, C-05)
C-02 is only displayed if P and O or Scan and Hold is selected as MPPT Type (C-01).
C-03 and C-04 are only displayed if Percentage is selected as MPPT Type (C-01).
C-05 is only displayed if Hold Input V is selected as MPPT Type (C-01).
NOTE 5 (U-16, F-02)
U-16 and F-02 are only displayed if Slave is selected as Premium MPPT Network
MODE (F-01).
NOTE 6 (B-04, B-05, C-05, O-04)
The factory settings of the listed constants are dependent on the different model
numbers.
Constant LCD Display
PM-SCC-80AM
Factory Setting
PM-SCC-40AMW
Factory Setting
B-04 Set Battery Capacity 1600 Ahr 800 Ahr
B-05 Bat. MAX Charge Amps 80A 40A
C-05 Set Hold Input Volts 140Vdc 240Vdc
O-04 Model Number PM-SCC-80AM PM-SCC-40AMW
4-7