Specifications

2. Iris Control: Autom atic Iris control
3. Viewing Angle (H x V):
a. 2.8 to 10 m m
1) W ide 100.8° x 73.7°
2) Tele: 28.5° x 21.4°
b. 9 to 22 mm
1) W ide 31.2° x 22.8°
2) Tele: 12.8° x 9.6°
c. 6 to 50
1) W ide 43.4° x 32.4°
2) Tele: 5.8° x 4.4°
I. Mechanical:
1. W eight: 740 g (1.63 lb.)
2. Mounting: Flush on hollow surface with three screws in a 4S electrical box
3. Color:
a. Trim ring: W hite (RAL91010)
b. Inner liner: Black
4. Adjustment range:
a. Pan: 360°
b. Tilt: 90°
c. Azimuth: ±90°
5. Construction:
a. Dome bubble: Polycarbonate, clear with UV blocking anti-scratch coating
b. Trim ring: Aluminum
J. Environm ental:
1. Operating Tem perature Default (with heater off): -30º to 55ºC (-22º to 131ºF)
2. Operating Tem perature (with heater on): -50º to 55ºC (-58º to 131ºF)
3. Storage Tem perature Range: -55º to 70ºC (-67º to 158ºF)
4. Operating Hum idity: 5% to 93% relative humidity
5. Storage Hum idity: Up to 98% relative hum idity
6. Impact Protection:
a. IEC 60068-2-75 test Eh, 50 J
b. EN 50102, exceeding lK 10
7. W ater/Dust Protection: IP 66 and NEMA-4X
2.3 ACCESSORIES
A. Mounts
1. VDA-455SMB Surface Mount
2. VDA-455W MT W all Mounting Bracket
3. VDA-455CMT Corner Mounting Bracket
2.4 ADDITIONAL EQUIPMENT
ALTV2416600UL Rack Mount Power Supply
ALTV2416600UL provides 24VAC or 28VAC distributed via sixteen (16) fuse protected outputs.
16 Fused Outputs CCTV Power Supply.
24VAC or 28VAC selectable output.
25 amp @ 24VAC (600VA) or 20 am p @ 28VAC (560VA) supply current.
Sixteen (16) fuse protected outputs.
Output fuses are rated @ 3.5 am p.
115VAC 50/60Hz, 5.4 am p input.
Surge suppression.
AC power LED indicator.
Illum inated Power Disconnect Circuit Breaker with manual reset.
Unit maintains camera synchronization.
Lifetim e W arranty
UL listed for Com m ercial CCTV Equipm ent (UL2044)
CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video and Similar Equipm ent
CE Approved
Middle Atlantic SBX-10 W all Mount Rack for CCTV equipment.
Mount and supply power per owner specified location.
Page 34