Specifications
false alarm s caused by sudden changes in lighting conditions.
7. Provide four independent, fully program m able privacy m ask areas.
8. Produce a com posite video signal, via a BNC connector, that allows a direct input to a
conventional analog matrix switcher, DVR, or any standard analog CCTV video
equipm ent.
9. Provide an on-screen display to sim plify the cam era/lens back focus and network
configuration settings.
10. Provide a lens wizard during lens back focus setup to allow focusing at maxim um lens
opening to ensure that the object of interest within the field of view always rem ains in
focus.
11. Provide a feature (SensUP) that enhances cam era sensitivity by increasing the
integration time on the CCD (lowering shutter tim e from 1/50 s to 1/5 s - PAL; 1/60 s to
1/6 s - NTSC). This is accom plished by integrating the signal from a num ber of
consecutive video fields to reduce signal noise.
12. Provide a fram e integration m ode (Bosch SensUp feature) that can produce a color
im age with a m inim um scene illumination of 0.248 lux (0.023 fc) and a m onochrome
im age, when in the night m ode, with a m inim um illum ination of 0.1 lux (0.0093 fc).
13. Provide enhanced night viewing through the increase of IR sensitivity by automatically
switching a m otorized IR filter from color to monochrom e operation in low-light or IR
illum inated applications. Allow the IR filter to be switched m anually via the alarm input,
preprogram m ed in a cam era m ode or profile.
14. Utilize XF-Dynam ic technology to extend the dynam ic range of the cam era to provide a
sharper im age, sim ultaneously, in both the high-light and low-light areas of the scene.
15. Utilize 2X-Dynam ic technology to extend the dynam ic range of the cam era to provide a
sharper, m ore detailed im age for increased accuracy in color reproduction in harsh
lighting conditions.
16. Utilize SmartBLC technology to autom atically compensate the im age without
com prom ising dynam ic range.
B. Installation Requirem ents
1. Shall contain a full-featured camera and integral varifocal lens.
2. Shall be capable of indoor and outdoor installations.
3. Shall be capable of being mounted to a surface, 4S (USA) electrical box, wall, corner,
and suspended ceiling.
4. Shall provide video and power connections on flying leads.
5. Shall provide a built-in test pattern generator.
6. Shall provide a m ulti-language on-screen display.
C. Alarm Handling Features:
1. Provide an alarm input that may be triggered by either a normally opened or norm ally
closed contact.
2. Provide the capability on alarm to display up to a 31 character, program mable alarm
message.
3. Provide a relay output that m ay be selected for norm ally opened or norm ally closed
operation. The relay can be activated from an external alarm input to the cam era,
manual activation from the browser, upon video m otion detection, or video loss.
D. Electrical:
1. Rated Voltage:
a. [VDN-498V03-21S: 12 VDC ± 10% / 24 VAC ± 10%, 60 Hz]
2. Power Consum ption:
a. 12 VDC: 400 mA
b. 24 VAC: 350 m A
3. CCD Type: 1/3-in. interline; W DR dual shutter
E. Active Pixels:
1. [PAL: 752 x 582]
2. [NTSC: 768 x 494]
F. Sensitivity
1. VDN-498V03 (F1.2)
a. Full Video (100 IRE)
1) Color: 2.48 lx (0.23 fc)
2) Color + SensUP 10 x: 0.248 lx (0.023 fc)
Page 32