Specifications

A. Subm it under provisions of Division One of the specifications
B. Product Data:
1. Manufacturer's data, user and installation m anuals for all equipm ent and software
programs including com puter equipm ent and other equipment required for com plete
video m anagem ent system .
C. Shop Drawings; include
1. System device locations on architectural floor plans.
2. Full Schematic of system , including wiring inform ation for all devices.
D. Closeout Subm ittals
1. User manual.
2. Parts list.
3. System device locations on architectural floor plans.
4. W iring and connection diagram .
5. Maintenance requirem ents.
1.6 QUALITY ASSURANCE
A. Manufacturer:
1. Minim um of [10] years experience in manufacture and design Video Surveillance
Devices.
2. Manufacturer's quality system: Registered to ISO 9001 Quality Standard.
B. Video Surveillance System
1. Listed by [UL] [EN] [FCC] specifically for the required loads. Provide evidence of
com pliance upon request.
C. Installer:
1. Minim um of [5] years experience installing Video IP Surveillance System.
1.7 DELIVERY, STORAGE AND HANDLING
A. Comply with requirem ents of Division One of the specifictions.
B. Deliver materials in m anufacture's original, unopened, undam aged containers; and
unharm ed original identification labels.
C. Protect store m aterials from environm ental and temperature conditions following
manufacturer's instructions.
D. Handle and operate products and system s according to m anufacturer's instructions.
E. Bosch provides off-the-shelf availability for our top selling products and sam e-day or 24-hour
shipping.
1.8 W ARRANTY
A. Provide manufacturer's warranty covering [3] years for replacement and repair of defective
equipm ent.
1.9 MAINTENANCE
A. Make ordering of new equipm ent for expansions, replacem ents, and spare parts available to
dealers and end users.
B. Provide factory direct technical support from 8:00 a.m . to 8:00 p.m . via phone and e-mail.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. Specified Base Bid Manufacturer:
Bosch Security System s, Inc.
B. Substitutions:
1. Proposed substitutions m ust provide com pliance docum entation of substitution vs.
specified products
2.2 BOSCH VDN-498 SERIES FLEXIDOME 2X DOME CAMERAS VDN-498V03-21S
A. General Characteristics:
1. High-im pact, vandal-resistant, CCD cam era with 20-bit digital signal processing (DSP).
2. Utilize 1/3-inch day/night CCD image sensor capable of producing up 540 TVL of
resolution.
3. Provide protection against water and dust up to IP 66 (NEMA 4X) standards.
4. Provide a cast-alum inum housing, polycarbonate dome and hardened inner liner able
to withstand the equivalent of 55 kg (120 lbs) of force.
5. Provide six distinct preprogram m ed operational m odes stored in the camera.
6. Provide a video motion detection function that provides one fully programm able area.
The m otion detector function incorporates a global scene change detector to minimize
Page 31