Specifications

inches by 42 inches (76 cm by 107 cm ) form at) shall be included in the
"as-build."
b. "As builds" shall be subm itted to the Owner for approval prior to the system
acceptance walk-through. Operation and m aintenance m anuals: Three sets of
operating m anuals shall be provided explaining the operation and maintenance
of the system
1.5 QUALITY ASSURANCE
A. Manufacturer Qualification:
1. The system shall be the standard product of one m anufacturer, and the m anufacturer
shall have been in business manufacturing sim ilar products for at least 5 years.
2. Manufacturer's Quality System: Registered to ISO 9001:2000 Quality Standard.
B. Installer Qualification:
1. Minimum of ten years' experience installing access control, surveillance and security
system s and future integrated software.
2. After-sales support: The Contractor shall be a factory-authorized and trained dealer of
the system and shall be a factory-trained and certified BCSD dealer to
install/m aintain/repair the system after system acceptance.
C. System Requirem ents:
1. All equipm ent, system s, and m aterials furnished and installed under this section shall
be installed in accordance with the applicable standards of:
a. National Codes: NEC, NFPA, UBC, BOCA, SBCCI, IBC as applicable.
b. Approvals and listings: UL, FM, ANSI SIA CP-01, CSFM, NYC-CoA, as
applicable.
c. Local Authorities Having Jurisdiction (AHJ).
1.6 DELIVERY, STORAGE, AND HANDLING
A. Deliver m aterials in manufacturer's original, unopened, undam aged containers; and
unharm ed original identification labels.
B. Store products in m anufacturer's unopened packaging until ready for installation.
C. Protect store m aterials from environmental and tem perature conditions following
manufacturer's instructions.
D. Handle and operate products and systems according to m anufacturer's instructions.
1.7 PROJECT CONDITIONS
A. Maintain environm ental conditions (temperature, hum idity, and ventilation) within limits
recom m ended by m anufacturer for optim um results. Do not install products under
environm ental conditions outside m anufacturer's absolute lim its.
1.8 W ARRANTY
A. All components, parts, and assem blies supplied by the m anufacturers and installed by the
Contractor shall be warranted against defects in m aterial and workmanship for a period of
at least 12 m onths (parts and labor), com m encing upon date of acceptance by Owner. A
qualified factory-trained service representative shall provide warranty service.
B. Service/Maintenance:
1. System maintenance and repair of system or workmanship defects during the
warranty period shall be provided by the Contractor free of charge (parts and labor).
2. Periodic testing of the system shall be carried out on a monthly or quarterly basis, by
the owner to ensure the integrity of the control panel, the sensing devices, and the
telephone lines.
3. The installer shall correct any system defect within six hours of receipt of call from the
Owner. 24hours per day, 365 days per year.
4. Extended service/m aintenance agreem ents shall be offered by the Contractor for up
to four years after the warranty expires. The agreem ent shall be renewable yearly.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Bosch Security System s, Inc.
2.2 GENERAL DESCRIPTION
A. Control Panel and Features:
1. The DACS control panel shall be Bosch Security System s, Inc. model D9412GV4
com prising a fully integrated intrusion, fire, and access control system . D7412GV4 for
the garage. Specifications for the main building. Specifications for the garage panel
Page 3