Specifications

b. Line Lock
8. Electronic Shutter: Flickerless, on/off, default shutter
9. W hite Balance:
a. Autom atic sensing (2500 to 9000K)
b. AW B hold and m anual
10. Camera ID: 16-character editable string, position selectable
11. Remote Control: Bi-directional coaxial com m unication
G. Optical
1. Varifocal: Manual zoom and focus adjustment
2. Iris Control: Autom atic Iris control
3. Viewing Angle (H x V):
a. 3 to 9.5 m m:
H. Mechanical:
1. W eight: 740 g (1.63 lb)
2. Mounting: Flush on hollow surface with three screws in a 4S electrical box
3. Color:
a. Trim ring: W hite (RAL91010)
b. Inner liner: Black
4. Adjustment range:
a. Pan: 360°
b. Tilt: 90°
c. Azimuth: ±90°
5. Construction:
a. Dom e bubble: Polycarbonate, clear with UV blocking anti-scratch coating
b. Trim ring: Polycarbonate
I. Environm ental:
1. Operating Tem perature Range: -10º to 45ºC (-14º to 113ºF)
2. Storage Tem perature Range: -40º to 70ºC (-40º to 158ºF)
3. Humidity: 5% to 93% relative hum idity
2.3 ACCESSORIES
A. Mounts
1. VDA-455SMB Surface Mount
2. VDA-455W MT W all Mounting Bracket
3. VDA-455CBL Clear Bubble
PART 3 - EXECUTION
3.1 EXAMINATION
A. Exam ine areas to receive devices and notify adverse conditions affecting installation or
subsequent operation.
B. Do not begin installation until unacceptable conditions are corrected.
3.2 PREPARATION
A. Protect devices from damage during construction.
3.3 INSTALLATION
A. Install devices in accordance with manufacturer's instruction at locations indicated on the
floor drawings plans.
B. Ensure selected location is secure and offers protection from accidental damage.
C. Location must provide reasonable tem perature and humidity conditions, free from sources
of electrical and electrom agnetic interference.
3.4 FIELD QUALITY CONTROL
A. Test snugness of m ounting screws of all installed equipm ent.
B. Test proper operation of all video system devices.
C. Determ ine and report all problems to the m anufacturer's custom er service departm ent.
3.5 ADJUSTING
A. Make proper adjustment to video system devices for correct operation in accordance with
manufacturer's instructions.
B. Make any adjustment of cam era settings to com ply with specific custom er's need.
3.6 DEMONSTRATION
A Dem onstrate at final inspection that video m anagem ent system and devices function
properly.
Page 29