Specifications

num ber of consecutive video fields to reduce signal noise.
10. Utilize XF-Dynam ic technology to extend the dynam ic range of the camera to provide
a sharper im age, sim ultaneously, in both the high-light and low-light areas of the
scene.
11. Provide AutoBlack, NightSense, and backlight com pensation features.
12. Provide Bilinx technology to allow rem ote setup, control, and updates over the video
cable.
B. Installation Requirem ents
1. Shall contain a full-featured cam era and integral varifocal lens with autom atic iris
control.
2. Shall be capable of being m ounted to a surface, 4S (USA) electrical box, wall, corner,
and suspended ceiling.
3. Shall provide video and power connections on flying leads.
4. Shall provide a m ulti-language on-screen display.
C. Electrical:
1. Rated Voltage: 12 VDC or 24 VAC, 50/60 Hz
2. Voltage Range: 10.8 to 39 VDC or 12 to 28 VAC, 45 to 65 Hz
3. Power Consum ption: 4 W
4. Imager: 1/3-in. interline transfer CCD
D. Active Pixels:
1. [PAL: 752 x 582]
2. [NTSC: 768 x 494]
E. Sensitivity
1. VDC-480V03
a. Full Video (100 IRE)
1) Color: 1.4 lx (0.13 fc)
2) Color + 10x SensUP: 0.14 lx (0.013 fc)
3) NightSense: 0.5 lx (0.046 fc)
4) NightSense + 10x SensUP: 0.05 lx (0.0046 fc)
b. Usable Picture (50 IRE):
1) Color: 0.35 lx (0.033 fc)
2) Color + 10x SensUP: 0.035 lx (0.0033 fc)
3) NightSense: 0.13 lx (0.012 fc)
4) NightSense + 10x SensUP: 0.013 lx (0.0012 fc)
c. Usable Picture (30 IRE):
1) Color: 0.16 lx (0.015 fc)
2) Color + 10x SensUP: 0.016 lx (0.0015 fc)
3) NightSense: 0.056 lx (0.0052 fc)
4) NightSense + 10x SensUP: 0.0056 lx (0.00052 fc)
5) Color: 0.62 lx (0.058 fc)
6) Color + 10x SensUP: 0.062 lx (0.0058 fc)
7) NightSense: 0.23 lx (0.021 fc)
8) NightSense + 10x SensUP: 0.023 lx (0.0021 fc)
d. Usable Picture (30 IRE):
1) Color: 0.28 lx (0.027 fc)
2) Color + 10x SensUP: 0.028 lx (0.0027 fc)
3) NightSense: 0.099 lx (0.0092 fc)
4) NightSense + 10x SensUP: 0.0099 lx (0.00092 fc)
F. Video
1. Horizontal Resolution: 540 TVL
2. Signal-to-Noise Ratio: >50 dB
3. AGC: Auto, m axim um level selectable 28 dB
4. Video Output: Composite video 1 Vpp, 75 Ohm
5. Dynam ic Range: 32x dynam ic range enhancem ent
6. Sharpness Correction:
a. Horizontal and vertical
b. Sym metrical
7. Synchronization:
a. Internal
Page 28