Specifications
1. Minimum of [10] years' experience in m anufacture and design Video Surveillance
Devices.
2. Manufacturer's quality system : Registered to ISO 9001 Quality Standard.
B. Video Surveillance System
1. Listed by [UL] [EN] [FCC] specifically for the required loads. Provide evidence of
com pliance upon request.
C. Installer:
1. Minimum of [10] years' experience installing Video IP Surveillance System.
1.7 DELIVERY, STORAGE AND HANDLING
A. Comply with requirements of Division One of the specifications
B. Deliver m aterials in manufacture's original, unopened, undam aged containers; and
unharm ed original identification labels.
C. Protect store m aterials from environmental and tem perature conditions following
manufacturer's instructions.
D. Handle and operate products and systems according to m anufacturer's instructions.
E. Bosch provides off-the-shelf availability for our top selling products and sam e-day or
24-hour shipping.
1.8 W ARRANTY
A. Provide manufacturer's warranty covering [3] years for replacem ent and repair of defective
equipment.
1.9 MAINTENANCE
A. Make ordering of new equipm ent for expansions, replacem ents, and spare parts available
to dealers and end users.
B. Provide factory direct technical support from 8:00 a.m. to 8:00 p.m. via phone and e-mail.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. Specified Base Bid Manufacturer:
Bosch Security System s, Inc.
B. Substitutions:
1. Proposed substitutions must provide com pliance docum entation of substitution vs.
specified products
2.2 BOSCH VDC-480 SERIES FLEXIDOME XF INDOOR CAMERAS VDC-480V03-20
A. General Characteristics:
1. Incorporate Bosch 15-bit digital signal processing and XF-dynam ic to optimize the
contrast in the picture and provide a 32X extended dynam ic range to maximize
picture performance and sensitivity under all lighting conditions.
2. Utilize 1/3-inch interline CCD im age sensor capable of producing up 540 TVL of
resolution.
3. Provide a polycarbonate, clear dom e bubble with a UV blocking antiscratch coating.
4. Provide a video motion detection function that provides four selectable sensitivity
areas. The m otion detector function incorporates a global scene change detector to
minimize false alarm s caused by sudden changes in lighting conditions.
5. Produce a composite video signal, via a BNC connector, that allows a direct input to a
conventional analog m atrix switcher, DVR, or any standard analog CCTV video
equipm ent.
6. Provide an on-screen display to sim plify the cam era/lens back focus and network
configuration settings.
7. Provide a lens wizard during lens back focus setup to allow focusing at m axim um
lens opening to ensure that the object of interest within the field of view always
rem ains in focus.
8. Provide a line-lock capability when powered by AC to synchronize the cam era to the
power line zero crossing for roll-free vertical interval switching. For vertical
synchronization in m ultiphase power installations, the cam era shall provide 0 to 358°
of continuously adjustable vertical phase delay. Crystal-lock shall be selected when
DC voltage is supplied or line-lock is switched off.
9. Provide a feature (SensUP) that enhances cam era sensitivity by increasing the
integration tim e on the CCD. This is accom plished by integrating the signal from a
Page 27