Specifications

VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
BOSCH VDC-480 SERIES FLEXIDOME XF INDOOR CAMERAS
PART 1 - GENERAL
1.1 SUMMARY
A. Section Includes
1. Video Surveillance Rem ote Devices.
1.2 REFERENCES
A. Canadian Standards Association (CSA)
1. CSA 22.2 No. 950
B. Federal Com m unications Com mission (FCC) (www.fcc.gov)
1. FCC CFR 47 part 15 class B - Telecom munications - Radio Frequency Devices -
Digital Device Em ission.
C. International Organization for Standardization (ISO)
1. 9001 - Quality System .
D. Underwriters Laboratories, Inc. (UL) (www.ul.com )
1. UL 1950 Standard for Inform ation Technology Equipm ent Including Electrical
Business Equipm ent
1.3 DEFINITIONS
A. Autom atic Gain Control (AGC): a process by which gain is autom atically adjusted as a
function of input or other specified param eter.
B. Privacy Masking: The ability to m ask out a specific area to prevent it from being viewed in
order to com ply with privacy laws and particular site requirem ents.
C. SensUp (sensitivity up): Increases cam era sensitivity by increasing the integration tim e on
the CCD (lowering shutter tim e from 1/50 s to 1/5 s - PAL; 1/60 s to 1/6 s - NTSC). This is
accom plished by integrating the signal from a number of consecutive video fields to reduce
signal noise.
D. NightSense: A m ethod of boosting the sensitivity of high-resolution Bosch color cam eras by
9db (a factor of 3) by com bining the signal of the color image in a single m onochrom e
picture.
1.4 SYSTEM DESCRIPTION
A. Video Surveillance Rem ote Devices
1. VDC-480 Series Dome Cam eras FlexiDom e XF Indoor Cam eras
B. Perform ance Requirements
1. 15-bit DSP image processing technology.
2. 1/3 inch Interline CCD sensor.
3. XF-Dynamic for wide dynam ic range.
4. Indoor polycarbonate dom e.
5. Dome shape for 90° vertical view.
1.5 SUBMITTALS
A. Subm it under provisions of subm ittals section of Division One of the specifications
B. Product Data:
1. Manufacturer's data, user and installation manuals for all equipm ent and software
programs including com puter equipm ent and other equipm ent required for com plete
video m anagement system .
C. Shop Drawings; include
1. System device locations on architectural floor plans.
2. Full Schem atic of system , including wiring inform ation for all devices.
D. Closeout Submittals
1. User manual.
2. Parts list.
3. System device locations on architectural floor plans.
4. W iring and connection diagram .
5. Maintenance requirements.
1.6 QUALITY ASSURANCE
A. Manufacturer:
Page 26