Specifications
programm ing functions locally or rem otely via a portable programm er or a com puter
running the Rem ote Program ming Software (RPS).
14. The DACS shall annunciate alarm , trouble, service reminders, and other relevant
system status messages in custom English text at the ACC.
1.3 REFERENCES
A. National Electric Code, Article 760.
B. National Fire Alarm Code (NFPA 72).
C. Adm inistrative Council for Term inal Attachm ents (ACTA):
1. ANSI/TIA-968-A-2002 Technical Requirem ents for Connection of Term inal
Equipm ent to the Telephone Network.
D. American National Standards Institute (ANSI):
1. ANSI C63.4 Methods of Measurem ent of Radio-Noise Em issions from Low-Voltage
Electrical and Electronic Equipm ent in the Range of 9 kHz to 40 GHz.
E. California State Fire Marshal (CSFM):
11.. Title 19, California Code of Regulations, Building Material Listing Program (BML).
F. Federal Com m unications Com mission (FCC):
1. Title 47 C.F.R. Part 15; Class B - Radiated and Conducted Emissions.
2. Title 47 C.F.R. Part 68; rules governing the connection of Terminal Equipm ent (TE)
to the Public Switched Telephone Network (PSTN).
G. The National Institute of Standards and Technology of the United States of America (NIST):
1. Federal Information Processing Standards Publications 197 (FIPS 197) -Advanced
Encryption Standard (AES).
H. International Organization For Standardization (ISO):
1. 9001 - Quality System .
I. Underwriters Laboratories, Inc. (UL):
1. UL 50 - Enclosures for Electrical Equipm ent.
2. UL 294 - Access Control System Units.
3. UL 365 - Police Station Connected Burglar Alarm Units and Systems.
4. UL 609 - Local Burglar Alarm Units and Systems.
5. UL 864 - Control Units System for Fire-Protective Signaling System .
6. UL 985 - Household Fire W arning System Units.
7. UL 1023 - Household Burglar Alarm System Units.
8. UL 1076 - Proprietary Burglar Alarm Units and System s
9. UL 1610 - Central Station Burglar-Alarm Units.
10. UL 60950-1 - Information Technology Equipm ent - Safety.
11. UL 636 - Hold up alarm s
1.4 SUBMITTALS
A. Subm it under provisions of subm ittal section of specifications Division One.
B. Product Data: Manufacturer's data, user and installation m anuals for all equipm ent and
software program s including com puter equipm ent and other equipment required for
com plete Digital Alarm Com municator and future 8 door Access Control System (DACS) for
the main building and sub-panel for the garage. Including:
1. Preparation instructions and recom mendations.
2. Storage and handling requirem ents and recomm endations.
3. Installation m ethods.
C. Shop Drawings: Shop drawings shall provide details of proposed system and the work to be
provided. Include point-to-point, reproducible CAD drawings of system s and wiring
diagram s of individual devices.
1. Detailed wiring diagram s and system description.
2. System device locations on architectural floor plans.
3. Full Schem atic of system , including wiring inform ation for all devices.
D. Docum entation to be subm itted by the Contractor upon com pletion of system installation:
1. "As-build": Upon com pletion of installation, the Contractor shall prepare "as-built"
drawings of the system . These "As-builds" shall be 30 inches by 42 inches (76 cm by
107 cm ) format Two com plete paper sets shall be provided and one CD containing all
of the reproducible drawings, in PDF or DW G format. These drawings shall indicate
com plete plans indicating exact device locations, panel term inations, and panel point
num bers.
a. Additionally, final point-to-point wiring diagrams of each type of device (on 30
Page 2