Manualshelf

Operation Manual

ManualsBrandsAmbrogio ManualsToolsL50
11121314151617181920
15
User’s manual
EN
BATTERY RECHARGE ON FIRST USE
Position the robot next to the recharging zone.
1. Check that the power supply unit is connected to the electricity power (110V or 220V).
2. Connect the black plug to the wheel containing the black “-” symbol.
3. Connect the red plug to the wheel containing the red “+” symbol.
Once connected, the robot automatically turns on to show the recharging level of the batteries. (see “meaning of LED combination”).
Once completely charged, disconnect the robot and press "OFF/ON"
The gure shows the correct installation of the robot’s recharging
zone. Correctly connect the recharging knobs to the nuts found on
the wheels of the robot.
Important
On rst recharge, the batteries be charged
connected for at least 4 hours.