Operation Manual

- 31 -
C141501600.fm
User's manual
GB
Before setting the cutting height
of the blade, make sure that the
robot has stopped in safety condi-
tions (see "Robot safety stop")
1-Place the robot on a flat base
surface.
2-Undo the knobs (A).
3-Remove the hood (B).
4-Undo the screws (C) and re-
move the body cover (D) on
both sides.
5-Detect from the measuring
scale (H) the height value of
the set trimming.
6-Insert a shim under the chas-
sis (F) of the robot (see figure)
so to increase or decrease the
cutting height value compared
to the one detected on the
measuring scale (H).
CUTTING HEIGHT SETTING
IDM - 41501602100.tif
hood (B)
knob (A)
IDM - 41501603500.tif
chassis
(F)
measuring scale (H)
IDM - 41501602800.tif
screw (C)
guard (D)