Operation Manual

- 23 -
C141501600.fm
User's manual
GB
Important
When reassembling the hood,
the hole (T) must be matching
with the referring plug. This as-
sures the correct functioning of
the battery polarity.
Warning - Caution
A wrong connection of the poles
may irreversibly damage the bat-
teries and the electronic circuits.
Important
When using the robot for the first time,
it is recommended to carefully read the
whole manual and to be sure to have it
completely understood, in particular all
the information relating to safety.
Use the equipment only for the tasks
authorised by the manufacturer and do
not tamper with any device to achieve
a different performance from the oper-
ating one.
The illustration represents the posi-
tion of the controls on the machine.
–"Start" (A) push button: it is
used to start the robot in differ-
ent operation modes.
Important
After 30 seconds from the acti-
vation of the "start" push button,
without assigning an operation
mode, the robot stops in safety
conditions.
–With the robot turned off, the
"start" push button, if pressed
shortly, is used to turn it on
with the "perimeter wire identi-
fication".
–With the robot already turned
on, the "start" push button, if
pressed shortly, is used to
start it with the blade in motion.
USE AND FUNCTIONING
RECOMMENDATIONS FOR USE
ROBOT CONTROLS DESCRIPTION
hood
IDM - 41501602600.tif
hole (T)
IDM - 41501603900.tif
led (E)led (F)
led (C)
led (D)
led (G) led (H)
push button
(A)
push button
(B)
batteries