Operation Manual

- 11 -
C141501600.fm
User's manual
GB
Power supply-transmitter unit in-
stallation area
– The unit must be far from the
perimeter wire from at least 2
m to maximum 10 m.
– The unit must be in a ventilated
position, safe from atmospher-
ic agents and from direct sun-
light.
– The unit must not be in direct
contact with the ground or with
humid environments.
Warning - Caution
To carry out electric connection,
it is necessary to arrange a pow-
er supply socket near the instal-
lation area. Make sure that the
connection to the power supply
complies to the laws in force on the
subject.
Important
Is it advisable to install the unit in a
closet for electric components (for out-
doors or indoors), well ventilated to
keep a correct air recirculation and
provided with a key closure.
Important
Assure that the access to the power
supply-transmitter unit is allowed only
to authorized people.
Perimeter wire path definition
– Check the conditions of the area to
trim to define the perimeter and carry
out in sequence all the operations.
– Arrangement and marking of the
working area (see page 12)
– Perimeter wire installation (see page
15)
– Power supply-transmitter unit installa-
tion (see page 17)
IDM - 41501601900.tif
power supply-transmitter unit
perimeter wire
wire laying direction