Operation Manual

- 6 -
C141501600.fm
User's manual
GB
Main components
– Accumulator batteries (A): they en-
ergize the motors of the blade and of
the wheel control system.
The robot is supplied with lead batter-
ies or with one or two lithium batter-
ies, which assure a longer working
session.
– Battery recharge connection (B): it
is used to connect the batteries (A)
during recharge.
– Electronic card (C): it checks the au-
tomatic functions of the robot.
– Drive unit (D): it drives the right and
left wheels with two independent mo-
tors.
– Control keyboard (E): it is used to set
and visualise the functioning modes of
the robot.
– Cutting blade (F): it trims the lawn.
– Electric motor (G): it starts the cut-
ting blade (F).
– Electric motor (H): one starts the
right wheels drive unit, while the other
one starts the one of the left wheels.
– Transmitter (L): it transmits the sig-
nal to the perimeter wire.
– Power supply unit (M): it energizes,
at low tension, the battery power.
Important
The power supply unit varies according
to the type of batteries installed (lead
or lithium batteries).
– Shock sensor (N): it detects the im-
pact of the robot against an obstacle,
reversing its advancement direction.
– Remote control (P): it is used to
check the robot functions in a remote
position.
signal transmitter (L)
battery charge cable
battery recharge
connection (B)
control keyboard (E)
drive unit (D)
electric motor (H)
electric motor (G)
cutting blade (F)
accumulator batteries (A)
accumulator batteries (A)
electric motor (H)
shock sensor (N)
remote control (P)
power supply unit (M)
electronic card (C)
IDM - 41501600300.tif