User's Manual

Preparing Your Phone

1. Installing SIM Card

1. Please keep your SIM card away from reach of children.

2. Scratches and bends can easily damage the SIM card. Please be extra careful

when installing, removing, handling or storing your SIM card.

3. Before installing or removing the SIM card, make sure the phone is switched OFF,

and then remove the back cover and battery.

a. Slide the back covers upward the bottom of the phone until it can be removed.

b. Remove the battery (see Removing Battery).

c. Place SIM card into the SIM slot.

d. Fit the battery with the metallic contacts at the right bottom corner.

e. Replace the back cover by fitting it to the back of the phone.

Installing Memory Card

1. Take out battery, slide open and lift metal buckle.

2. Put the end of Golden Finger aiming at T card slot with metal face down horizontally.

3. Close the metal buckle and slide lockup.

4. If you want to take it out, do as per the above instructions contrarily.

3. Install Battery

1. Connect the battery’s metal touch points separately with the battery compartment metal

touch points, and put the battery base to the slot.

2. Put the back cover to its place.

Remove Battery

Remove the back cover then lift the bottom of the battery and remove it.

Notes: Settings and data stored in the phone or SIM card may be lost after the battery is

removed.

Charge Battery

Connect the charger to power supply, and then insert the charger pin into the I/O jack.

Notes:

1. When charging, DO NOT remove or take out the battery to avoid the battery circuit to

cause fire.

2. While charging, it is normal that the phone and charger will become hot.

3. If the battery is completely empty, it may take a period of time before the charging icon

appears on the display.

USB Management