User's Manual

Q206 User Manual
12
3.5 Make a call
1. Under the sleep mode, input the telephone number directly.
2. Steps will be different according to the options of call settings and set-ups of dual SIM:
Dual SIM open: Then press send key, you can choose menu -- SIM 1/SIM 2 to dial calls.
Only SIM 1 open/ only SIM2 open: If set only SIM1 or only SIM2, you can press send
key to dial calls.
3. After calling, press the power on/off key or end key to end.
3.6 Answer or Reject a call
When there is an incoming call, the phone rings and /or vibrates showing the number or
the corresponding name.
Now the phone provide three mode,
Not any key(set in profiles): Press answer key or enter option and then select answer
to receive a call. If you don’t want to answer, you can press the power on/off key or right
soft key.
Any key: Except power on/off key and right soft key, press any key to answer a call.
Earphone/Bluetooth mode: when plugging the earphone(including bluetooth earphone),
you can answer a call by pressing the key on the earphone; when you are not convenient
to press the key, you can turn on the auto-answer mode (only in earphone mode) and
make sure the earphone is plugged, your phone auto-answers a call 5 seconds after it
rings and/or vibrates.
3.7 Operation during a call
Press Option to perform following operation during a call:
Hold Single: Hold this call
End Single: Hang up and end this call
New Call*: Enter a new dialing display to make a new call
PhoneBook: Enter the phone book
Messages: Enter messages
Mute: Set mute on or off. When setting mute on, your voice can not be
heard through the line.
Swap*: Switch between the current call and the holding call
Conference*: You can add additional parties to a call.
Note: the menus marked with * must be supported by your SIM card. For details, please