User's Manual

69
5 SD Card Introduction
Your mobile phone supports SD card to
expand the memory. Install the SD card according
to the indication.
As one of storages for your phone, SD card
has been set as the default storage at factory. You
can directly use it without making any settings.
Use as flash disk: If “Phone——Data
Wire——PC” is well connected, the PC will
prompt “New hardware is found”, and“MT65xx
Android Phone requires to be installed” will
appear in the dialog box, see the figure below:
Check the relevant menus in the phone are
opened or closed, selecting one by one as
follows:
Main Menu - Settings - Application - Development
- USB debugging. Uncheck “USB debugging”.