User's Manual

press the dialing key. If called by SIM card 1, the screen will display “SIM Card 1 Dialing”,

and if called by SIM card 2, the screen will display “SIM Card 2 Dialing”.

Call status will be displayed on the screen when the call is answered.

Press the hang-up key to end the call.

Make domestic calls: zone number + phone number + dialing key.

• Making an international call:

To make an international call, long press or repeatedly short press the * key until the symbol

“+” is displayed on the screen. This allows you to make an international call without

knowing the prefix number of that country (e.g. India is +91).

Then input the country code and the complete phone number. The country code is subject to

convention, e.g. Germany is 49, Britain is 44 and Sweden is 46, etc.

Make international calls: + country code + complete phone number + dialing key

• Call extension of a fixed phone:

Extensions of some fixed phones are not accessible directly, in such case, you need to dial the

host number and then the extension number. Simply insert the letter “P” between the hos

number and the extension number and you can call the extension. You can input a “P” by

long pressing or repeatedly short pressing the * key.

Call extension of a fixed phone: phone number + P + extension number + dialing key.

• Make emergency calls:

In any country where digital GSM is used, you can make an emergency call if your phone is

covered by the network (you can know about this by checking the signal strength indicato

bar at the upper corner of the display of the cell phone). If your network operator does no

rovide roaming service in that area, the screen will display "EMERGENCY CALLS

ONLY", telling you that you can make this kind of call only. If you are in the coverage of the

network, you can make emergency calls even if your SIM card is not inserted in the mobile.

* In some areas, the 112 (emergency call) services are provided by the network operator. I

there is anything abnormal, contact your network operator.

• IMEI:

International Mobile Equipment Identity. You can see the bar code label printed with this

number at the back of the cell phone after you have turned off the cell phone and removed

the battery. This number is also stored in the cell phone, and can be displayed when you

enter "*#06#" on the screen dial interface.

V. Basic operation of cell phone:

 Switch on:

Press and hold on “ON/OFF” to start up the cell phone. If no password settings are given for the

SIM card and cell phone, the phone will search for a network automatically, and when the cell

phone registers a network, the name of the network supplier will be shown on the screen. You can

now answer or make a call.

If the display indicates “Insert SIM card 1”or”Insert SIM card 2” after the start-up, please power of

your phone, and check whether your opposite SIM cards have been installed correctly or have been

installed or not.