User's Manual

and the time received.

• Reply path: To transfer the reply path to the network terminal. This function requires the

support of message center.

• Save sent message: To save the sent message.

 Memory Status: Check memory space use of SIM card or mobile phone.

 Preferred Storage: Appoint the directory to save the message. (SIM cards or mobile phone

2. Phone Book:

Each contact saved in your phone contains the following useful information: three phone numbers

(mobile phone number, home number and office number), company name, email, fax number,

birthday, photo, ring tone and group; each contact saved in the SIM card only contains name and

phone number.

You can save the contacts in the mobile phone and SIM card; it depends on the SIM card memory

capacity.

 Quick Search: After entering the searching interface, inputting the first letter of one’s name,

you can locate the contact name and number in an alphabetical order of the particular alphabet

entered.

 Add New Contact: You can save names and phone numbers in the phone or SIM card.

Description: If picture link, ring link, and incoming call group are set in a record simultaneously

the incoming call group function will be invalid.

 Caller groups:

You can select caller group, view and edit the group details. Group details contain group name,

ringtone, picture, and member list.

 Phonebook settings:

a. Preferred storage: Select the storage directory of the current number.

(E.g.: SIM Card 1 or 2, Phone)

b. Speed dial: To switch on the speed dial function, and edit the corresponding speed dial number. I

the speed dial is "On", then you can long press the corresponding key (2-9) to dial the numbe

designated to the key through the standby mode.

c. My vCard: Edit or send your name card.

Note: Sending VCard can only be supported when the received phone also has this function.

Otherwise the VCard cannot be displayed normally on the received phone.

d. Extra numbers:

• Owner number: To view and edit the caller number of SIM 1/2.

• Fixed dial: This function may need the support of SIM card and network operator. When this

function is activated, you can only dial the fixed numbers in the fixed dial list. To activate the

fixed dial, enter the PIN2.

• Service numbers: To view and edit the service number of SIM 1/2.

e. Memory status: To view the service condition of the phone book storage.

f. Copy contacts: You can copy all selected phone entries in SIM cards 1/2, phone to each other.

g. Move contacts: You can copy all selected phone entries in SIM cards 1/2, phone to each other.