User`s guide

User’s Guide 21
Troubleshooting the USB Installation
None of the LEDs are on when I power on the Wireless LAN Cable Modem.
Check the connection between the power adapter and the cable modem. Power off the
Wireless LAN Cable Modem and wait for 5 Seconds and power on the modem again. If the
problem still exists, you may have a hardware problem.
When attempting to install the USB driver in Windows 98 SE, I receive the following
error message: Device not installed at this time. Driver not found.
This usually occurs when the wrong driver has been installed. To remove the wrong driver
and install the correct driver:
1. Right-click on the My Computer icon on your desktop and choose Properties.
2. Click the Device Manager tab
3. Click the plus sign next to Universal Serial Bus controllers to view the list of installed
USB device drivers
4. Select USB Composite Device and click Remove
5. Click Refresh
The Add New Hardware Wizard window appears, displaying the device name USB
Composite Device. Refer to the proper operating system instructions in this chapter for
information on reinstalling the driver properly.