Instruction manual

Figure 3.b. Recommended Methods of Heater Suspension.
Where chain supports have an
angle of inclination greater
than 15° an equal and opposite
support is recommended
.
Vertical suspension chain ideal. Where supports are inclined, maximum recommended angle of inclination is 15°.
Shackle method of attachment. Pin must be tightened by pliers.
Drop rod with formed hook. note. hook or eyebolt must be closed tight.
These angles to be equal and not more than 45°.
15° max.
Vertical or inclined suspension on this plane is acceptable.
*
*
Typical Speedlink attachment.
ON U TUBE VARIANTS THE HEATER SHOULD SLOPE DOWNWARDS TOWARDS THE RETURN
BEND BY APPROX. 10mm FOR BOTH HORIZONTAL AND WALL MOUNTED INSTALLATIONS.