Specifications

4
**
*
Figure 1. Recommended Methods of Heater Suspension.
Were chain supports have an
angle of inclination greater than
15° an equal and opposite
support is recommended
.
Vertical suspension chain ideal. Where supports are inclined max. recommended angle of inclination 15°
Shackle method of attachment. Pin must be tightened by pliers
Drop rod with formed hook. n.b. hook or eyebolt must be closed tight after installation.
Alternative method of suspending ‘U’ tube and linier type heaters.
IMPORTANT: THE HEATER SHOULD SLOPE DOWNWARDS TOWARDS THE RETURN BEND
BY APPROX. 10mm FOR BOTH HORIZONTAL AND WALL MOUNTED INSTALLATIONS.
15° max
VSX models
Vertical orinclined suspension on this plane is acceptable.
*
*
Ensure that there is adequate provision in the building for combustion and ventilation air supply. Installation must meet minimum requirements and applicable codes.