User guide

- 6 -
STEP 2- Install Hardware
After you have installed the software and restarted your computer:
a) Connect the USB cable from the scanner to your USB port on your
computer as shown below. If necessary, please check your computer’s
user guide to identify the USB ports available and their locations.
b) Under Windows XP and Vista operating system, the computer will automatically
detect the new hardware device and install the driver. (See above)
c) Under Windows 2000, ME, and 98SE you may be required to browse to the
installation CD where Windows will retrieve additional driver components to
complete the installation. Follow the step-by-step Found New Hardware Wizard
installation instructions and finish your installation. (See above)