Quick Start Guide

Apollo3 Blue EVB Quick Start Guide
QS-A3B-1p00 Page 8 2018 Ambiq Micro, Inc.
All rights reserved.
4. Debug Interface
Figure 3 shows the Apollo3 Blue EVB set up for standard debug using the on-board J-Link debugger and
on-board power supply configured for 3.3V.
Figure 3. Apollo3 Blue EVB using On-board J-Link Debugger
The debug interface is supported by standard J-Link drivers from Segger. Please refer to “Software
Development Tools” on page 11 for more details on J-Link debug support.
Segger
J-Link
Adapter