Owner manual

ACN-LS

9. LED Indications

on OLED side:

As used to from former devices of the Cockit Time Code family, the ACN-LS has a red and a

green flashing LED to display operation and battery status:

0 1 2 3 4 seconds:

● ● ● ● ● red flashing in 1 second intervals: running, but not jammed or set.

● ● ● ● ● green flashing in 1 second intervals: running, jammed or set manually.

This is the normal operation mode.

● ●● ●● red double flash every 2seconds: battery low, not jammed or set.

● ●● ●● green double flash every 2seconds: battery low, jammed or set.

● ●●● ● ●●● combination of not sync and low battery, not set or jammed.

● ●●● ● ●●● combination of not sync and low battery, set or jammed.

● ● ● ● ● ● ● ● ● ● alternating colors during firmware update.

on LED Display side:

● ● ● ● ● green flashing in 1 second intervals: running, jammed or set manually

● ● ● ● ● ● green flashing in 1 second intervals with off-beat every 4 seconds

indicates LED offset.

In LTC-VARI the LED is solid red if no time code is present, solid green if time code

recognized.

10. Firmware Update

New features, improvement and fixes for the ACN-LS will be available for download from our

website:

http://www.ambient.de/en/products/ambient-recording/clockit-timecode/lockit-slate.html

The firmware update comes as a zipped package including the QT programming interface and

the firmware file, and a Mac DMG

Windows®: Unzip the programming files. Connect the ACN-LS to a computer running a

Microsoft Windows® operating system using a USB-A cable to Mini-USB B connector and run the

updater. Press the “UPDATE” button. Wait until the message “update successful” appears.

Apple® MAC-OS: extract the archive, mount the DMG and run the updater. Press “UPDATE” and wait until

the programming is finished.