Owner manual

experience quality. ACN-LS

www.ambient.de/en

GEN > UB

In the GEN > user bit menu, the user bits are being

displayed. The user bits can be edited manually, and

the jam behavior managed.

JamUB

Under JamUB, the jamming behavior is managed:

normal: the user bits are being taken from external

time code

manual: the user bits are not being overwritten by

external time code. This mode is to be used if you

want a custom entry, like date and camera Id for

instance.

insert: user bits can be inserted “on the fly”. Note: if

the source time code was unplugged for more than 3

seconds and reconnected, the ACN-LS will re-jam. For just inserting changed user bits after

interrupted time code, you must also set the ACN-LS to “jam once” or “off” in the jamTC menu.

If changed user bits from the master shall be taken over in C-JAM mode, “insert mode” must

be selected.

Edit-UB

In Edit-UB, the user bits can be edited manually.

Decrease or increase by toggling left/right. Holding

left/right is fast backward/ forward. Push to select

value, curser jumps to next digit.

After finishing, selecting the new value needs to be

confirmed – “use new”, or the menu can be left by

cancelling – “use old”.

EXIT

As the user bits are only displayed in this menu, we

added a way to exit without any changes quickly.