User's Manual

Prior to entering the MIN/MAX mode, press the CHANNEL/+ button to

select the temperature and humidity values you wish to view.

1. Display Maximum. Press the MIN/MAX button once to display

the maximum. The MAX icon will be displayed.

2. Clear Maximum. To reset the maximum values to the current

values, press and hold the CLEAR button for 3 seconds.

3. Display Minimum. Press the MIN/MAX button again to display

the minimum. The MIN icon will be displayed.

4. Clear Minimum. To reset the minimum values to the current

values, press and hold the CLEAR button for 3 seconds.

To return to normal mode, press the MIN/MAX button again.

4.2 Clearing Min/Max Daily

The minimum and maximum can be set to clear every 24 hours

automatically. Press and hold the CLEAR/ADJUST button for 3 seconds

to switch between Clears 24h and Clears Manually.

When you manually clear the minimum and maximum, the Clears 24h

function will clear every 24 hours from the time you clear it.

For example, if you clear the min and max at 4:00pm, it will continue to

clear every day at 4:00pm.

4.3 Outdoor Channel Selection and Scroll Mode

Press the CHANNEL/+ button to switch the display between remote

sensors 1 through 8, and scroll mode . In scroll mode, all of the remote

sensors will be displayed in five second intervals.

4.4 Temperature Units of Measure

The default temperature units of measure are degrees Fahrenheit. To

toggle between degrees Celsius and degrees Fahrenheit, press and hold

the MIN/MAX button for 3 seconds.

4.5 Sensor Search Mode and Resyncing the Sensors

If any of the sensor communication is lost, dashes (--.-) will be displayed

on the screen. To reacquire the signal: