User's Manual

Figure 1

All of the LCD segments will light up for a few seconds to verify all

segments are operating properly.

3. Replace the battery door, and fold out the desk stand and place the

console in the upright position.

The console will instantly display indoor temperature and humidity. The

remote temperature and humidity will update on the display within a few

minutes on the appropriate channel.

While in the search mode, the remote search icon will be constantly

displayed next to the channel number.

If you have more than one remote sensor (up to eight remotes are

supported), the display will automatically toggle between sensors until all

sensors have reported in.

Do not touch any buttons until the remote sensor has reported in, or the

radio search icon is no longer on, otherwise the remote sensor search

mode will be terminated. When the remote sensor temperature and

humidity has been received, the console will automatically switch to the

normal mode, and all further settings can be performed.