User's Manual

8. Accessories
The following software and hardware accessories are available for this
weather station at www.AmbientWeather.com .
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 15
Problem
Solution
Temperature sensor
reads too high in the
day time.
Make sure the thermo-hygrometer is mounted in
a shaded area on the north facing wall. Consider
the following radiation shield if this is not
possible:
http://www.ambientweather.com/amwesrpatean.
html
Indoor and Outdoor
Temperature do not
agree
Allow up to one hour for the sensors to stabilize
due to signal filtering. The indoor and outdoor
temperature sensors should agree within 2 °F
(the sensor accuracy is ± 1 °F).
Use the calibration feature to match the indoor
and outdoor temperature to a known source.
Indoor and Outdoor
Humidity do not
agree
Allow up to one hour for the sensors to stabilize
due to signal filtering. The indoor and outdoor
humidity sensors should agree within 10 % (the
sensor accuracy is ± 5 %).
Use the calibration feature to match the indoor
and outdoor humidity to a known source.
Display console
contrast is weak
Replace console batteries with a fresh set of
batteries.